- Lighting Aim
- Lighting guides
- The Home Lighting Guide: Lumens, Colour and Layers
The Home Lighting Guide: Lumens, Colour and Layers
A master guide to lighting a home well, from how much light a room needs to colour temperature, layers and the right fittings, linking every detailed guide.
- Pillar Guide
- 4 min read

Good lighting comes from four decisions: how much light the room needs, what colour that light should be, how it is layered and which fittings deliver it. This guide walks through each decision and links to the 17 detailed guides on this site.
Most rooms are lit by habit: one ceiling light in the middle and perhaps a lamp in the corner. It works, but it rarely feels good. Rooms look flat, work surfaces end up in shadow and evenings feel either too bright or too gloomy. The good news is that better lighting does not require a designer or a big budget. It requires a few numbers you can read on any bulb box and a simple method for placing light where it is useful. This guide is that method.
1. How much light?
Brightness starts with two units. Lumens measure how much light a source gives out; lux measures how much light lands on a surface. A simple relation links them: total lumens are roughly the lux you want multiplied by the floor area. Commonly cited home ranges run from about 100 lux in a hallway to 300–500 lux on a kitchen worktop or desk.
- The numbersHow many lumens do I need?
- Reading the boxHow to read a lamp spec sheet
- Old vs new bulbsLED vs halogen vs incandescent
- Bulb basesLight bulb bases explained
2. What colour of white?
White light comes in different temperatures. Warm white, around 2700–3000 K, feels relaxed and suits living rooms and bedrooms. Neutral white, around 4000 K, feels crisp and suits kitchens, bathrooms and desks. Colour temperature is not the same as colour quality: a lamp's CRI tells you how faithfully it shows colours.
- Warm or coolColour temperature explained
- Colour qualityCRI explained
3. Layer the light
The single most useful idea in lighting is layering. Ambient light lets you move around safely, task light makes activities easy and accent light adds depth. A room with all three, on separate switches or dimmers, can be bright and practical in the morning and calm in the evening.
- Understand the method: Layered lighting explained
- Make it adjustable: Dimmable LED guide
- Add control: Smart lighting basics
4. Room by room
Each room has its own priorities. Kitchens need shadow-free light on worktops, bathrooms need safe fittings with the right IP rating, bedrooms need warm and dimmable light, and home offices need glare-free light at the desk.
| Room | Main priority | Guide |
|---|---|---|
| Living room | Layers and dimming | Living room lighting |
| Kitchen | Task light on worktops | Kitchen lighting |
| Bathroom | Safety zones, even mirror light | Bathroom lighting zones |
| Bedroom | Warm, dimmable, reading lights | Bedroom lighting |
| Home office | Glare-free desk light | Home office lighting |
5. Choose the fittings
Once you know what light you need, the fitting is easier to pick. Pendants suit tables and islands, linear fittings spread light evenly over desks and corridors, and outdoor fittings need a suitable IP rating.
- Hanging heightPendant light height
- Linear fittingsLinear LED lights guide
- OutdoorsOutdoor lighting IP ratings
Decide the amount of light first, then its colour, then how it is layered, and only then choose fittings. Working in that order avoids most lighting mistakes and makes product pages much easier to compare.
Hard-wired fittings, new circuits and any work in bathrooms should be carried out by a qualified electrician in line with local regulations.
Frequently asked questions
Is one bright ceiling light enough for a room?
It can provide enough light, but it usually creates shadows and glare. Combining several smaller sources feels better.
Should all bulbs in a room be the same colour temperature?
Keeping them consistent usually looks best; very different temperatures in one room can look patchy.
Are higher-wattage LEDs brighter?
Usually, but compare lumens instead; efficiency varies between products.
General information only. Mains wiring, new circuits and work in bathrooms should be carried out by a qualified electrician in line with local regulations. Always follow the product's installation instructions.
13