- Lighting Aim
- Lighting guides
- Linear LED Lights: Surface-Mounted and Suspended
Linear LED Lights: Surface-Mounted and Suspended
Where linear LED fittings work best, how to choose length and output, and the difference between surface-mounted and suspended versions.
- Guide
- 4 min read

Linear LED fittings are long, slim lights that spread light evenly along their length. Surface-mounted versions sit directly on the ceiling; suspended versions hang on cables. They suit desks, dining tables, kitchen islands and corridors, where a single round fitting would leave the ends in shadow.
Linear lights started in offices and are now common in homes. Their shape matches the rooms and furniture they light: a long table, a corridor, a row of desks or a kitchen island. Instead of one bright point, they give a line of softer light, which reduces shadows and glare. This guide explains how to choose them. For the broader picture, see the home lighting guide and the linear lighting overview page.
Surface-mounted or suspended?
- Surface-mountedFixed directly to the ceiling. Good for lower ceilings, corridors and rooms where you want the fitting to disappear.
- SuspendedHung on cables at a chosen height. Good over tables, islands and desks, and in rooms with high ceilings.
- Up-and-downSome suspended fittings light both the ceiling and the table, giving softer overall light.
Choosing the length
Over a table or island, a fitting slightly shorter than the surface usually looks balanced and keeps the light where people sit. In corridors, one long fitting or several in a row can run along the centre line. Check the fitting's actual dimensions in the product data, including the mounting plate and cables.
Watts and lumens
Wattage tells you how much power the fitting uses; lumens tell you how much light it gives. Longer fittings usually have higher wattage and lumens. Compare lumen figures between products rather than watts, and check how the output fits the room total from how many lumens do I need.
Height for suspended fittings
Over a dining table, suspended fittings are commonly hung so the bottom sits roughly 75–90 cm above the tabletop, the same guidance used for pendants. Over a desk, hang it high enough not to block sightlines. Details are in pendant light height.
Glare and diffusers
Linear fittings with an opal diffuser or a microprismatic cover soften the light and hide individual LEDs. This matters especially over desks and screens; see home office lighting. Fittings that send part of their light upwards reduce contrast between the bright fitting and the ceiling.
Colour temperature and CRI
Warm white suits dining areas; neutral white suits work areas and kitchens. A CRI of 90 or above makes food, wood and skin look natural; see colour temperature explained and CRI explained.
Dimming
Not all integrated LED fittings are dimmable, and those that are may need a specific type of dimmer. Check the product data before planning dimmers; the dimmable LED guide explains the options.
Installation
Most linear fittings are hard-wired. Suspended versions need a secure ceiling fixing and correctly adjusted cables so the fitting hangs level.
Hard-wired fittings should be installed by a qualified electrician, following the manufacturer's instructions and local regulations.
Choose surface-mounted linear lights for low ceilings and corridors, suspended ones over tables and islands, match the length to the surface and compare lumens rather than watts.
Frequently asked questions
Can a linear light be the only light in a room?
Over a dining table or desk area it can provide most of the light, but lamps add warmth and flexibility.
Do linear fittings suit kitchens?
Yes, both as a ceiling layer and suspended over islands.
Are linear LEDs replaceable?
Many use integrated LEDs; check whether the LED module or driver can be replaced.
General information only. Mains wiring, new circuits and work in bathrooms should be carried out by a qualified electrician in line with local regulations. Always follow the product's installation instructions.
03
05
13