- Lighting Aim
- Lighting guides
- CRI Explained: Why Colour Rendering Matters
CRI Explained: Why Colour Rendering Matters
What the colour rendering index measures, which CRI to look for and where it makes the biggest difference at home.
- Guide
- 3 min read

CRI (colour rendering index) shows how faithfully a light reveals colours compared with a reference light, on a scale up to 100. For most home lighting CRI 80 is acceptable; CRI 90 or above looks noticeably better in kitchens, bathrooms, wardrobes and around artwork.
Have you ever bought a shirt that looked one colour in the shop and another at home? Or noticed that food looks dull under some kitchen lights? That is colour rendering at work. Two lamps with the same brightness and colour temperature can show colours very differently. This guide explains the number that describes it. It is one of the four basic decisions in the home lighting guide.
What CRI measures
CRI compares how a set of standard colour samples looks under the lamp with how it looks under a reference light of the same colour temperature. The closer the match, the higher the score. Sunlight and old filament bulbs score close to 100 by definition. LEDs vary: basic products are often around 80, better ones 90 or above.
R9 and saturated reds
The general CRI figure is an average of a set of pastel samples. It does not include saturated red, which is why some products also publish R9. A low R9 makes skin, wood and red food look dull. If a manufacturer lists R9, a positive and reasonably high value is a good sign; many do not list it at all.
Where high CRI matters most
- KitchenFood looks fresher and it is easier to judge whether meat is cooked. Kitchen lighting
- Bathroom mirrorSkin tones and make-up look natural. Bathroom lighting zones
- Wardrobe and dressingClothes colours look as they will outdoors.
- Art and hobbiesPaintings, crafts and sewing benefit from accurate colour.
- Living spacesWood, fabrics and plants look richer.
CRI is not colour temperature
Colour temperature tells you whether light looks warm or cool; CRI tells you how accurately it shows colours. A warm white bulb can have a high or low CRI, and so can a cool white one. Check both numbers. For the first, see colour temperature explained.
Reading CRI on the box
CRI is often written as "CRI 90", "Ra 90" or "CRI > 90" on packaging and spec sheets. If it is not stated, the product is likely to be around the basic level. Other important figures are covered in how to read a lamp spec sheet.
Newer metrics
Lighting specialists also use newer measures such as TM-30, which describe colour fidelity and saturation in more detail. They are useful for professionals but rarely shown on consumer packaging. For home use, CRI and, where available, R9 are enough to compare products.
Does high CRI cost more?
High-CRI LEDs can be slightly less efficient, which means they may need a little more power for the same lumens, and they are often priced higher. In rooms where colour matters, the improvement is usually worth it; in hallways and storage areas, a basic CRI is fine.
Look for CRI 90 or above where colours matter — kitchen, bathroom mirror, wardrobe and artwork — and accept around CRI 80 in hallways and utility spaces. Always check colour temperature separately.
Frequently asked questions
Is CRI 80 bad?
No; it is acceptable for general lighting. The difference shows most where colours are important.
Do old halogen bulbs have high CRI?
Yes, filament bulbs render colours very well, which is why good LEDs aim for high CRI.
Does CRI change when I dim an LED?
Usually only slightly, but it depends on the product.
General information only. Mains wiring, new circuits and work in bathrooms should be carried out by a qualified electrician in line with local regulations. Always follow the product's installation instructions.
05
01
02