Skip to content
Lighting Aim
0
  1. Lighting Aim
  2. Lighting guides
  3. Kitchen Lighting: Worktops, Islands and Ceiling Light

Kitchen Lighting: Worktops, Islands and Ceiling Light

How to light a kitchen so worktops are shadow-free, islands look good and the room still feels warm in the evening.

  • Guide
  • 4 min read
Kitchen Lighting: Worktops, Islands and Ceiling Light

Kitchens need bright, shadow-free task light on the worktops, usually from under-cabinet fittings, plus a ceiling layer for general light and, if you have one, pendants over the island. Choose warm-to-neutral white with a high CRI so food looks natural.

The kitchen is the room where poor lighting is most noticeable. A single ceiling light behind you casts your own shadow onto the chopping board, and dull light makes food look unappetising. Kitchens are also used at all hours, from early breakfasts to late conversations, so they need both bright and soft settings. This guide shows how to layer kitchen lighting; the full method is in the home lighting guide.

How much light?

Commonly cited levels for kitchen worktops are around 300–500 lux, higher than most other rooms. A 15 m² kitchen therefore needs roughly 4,500–7,500 lumens in total, but much of that should land on the worktops rather than the floor. Use the lux calculator and how many lumens do I need to estimate yours.

Task light under cabinets

Under-cabinet lighting is the most effective upgrade in most kitchens. Slim LED strips or linear fittings mounted towards the front edge of the wall cabinets light the worktop directly, without shadows. A diffuser hides the individual LED dots and reduces glare reflected from glossy worktops.

The ceiling layer

The ceiling layer lights the floor, the cupboards and the room as a whole. Evenly spaced downlights, a linear fitting or a pair of ceiling lights all work. Place them so they light the front of the cabinets rather than directly over your head at the worktop. Dimming the ceiling layer lets the kitchen relax in the evening.

Islands and tables

Pendants over an island or dining table provide task light and visual focus. The number of pendants depends on the length of the island and the size of the shades. Hanging height is covered in pendant light height. Suspended linear fittings are an alternative over long islands; see the linear LED lights guide.

Colour temperature and CRI

Warm to neutral white, roughly 3000–4000 K, is common in kitchens. Choose one temperature and use it for all the main layers so the room looks consistent. High colour rendering, CRI 90 or above, makes food, wood and skin look natural; see CRI explained.

  • WorktopsUnder-cabinet strips or linear fittings with a diffuser.
  • GeneralCeiling downlights, linear or surface fittings, ideally dimmable.
  • IslandPendants or a suspended linear fitting.
  • AccentLights inside glass cabinets or a strip on the plinth.

Near the sink and hob

Fittings close to water should have a suitable IP rating, and fittings above a hob must be designed for the heat and grease there; cooker hoods often include their own lights. The outdoor lighting IP ratings guide explains how IP codes work.

Planning steps

  1. Mark the worktops and plan under-cabinet light along their full length.
  2. Lay out the ceiling layer to light cabinet fronts and walkways.
  3. Add island pendants sized to the island.
  4. Separate the switches for worktop, ceiling and island lights.
  5. Add dimmers to the ceiling and pendant layers.

New lighting circuits, connections near sinks and work in kitchens should be done by a qualified electrician following local regulations.

Frequently asked questions

Should under-cabinet lights be warm or cool?

Match them to the ceiling lights; warm-to-neutral white is a common choice.

Are LED strips bright enough for worktops?

Good strips with a diffuser can be, if their lumen output per metre is adequate for the length.

How far apart should kitchen downlights be?

It depends on beam angle and ceiling height; spacing them to light cabinet fronts evenly is the aim.

Part of the master guideThe Home Lighting Guide: Lumens, Colour and Layers

General information only. Mains wiring, new circuits and work in bathrooms should be carried out by a qualified electrician in line with local regulations. Always follow the product's installation instructions.

ShareWhatsAppPinterest